Comfort Bundle - Black Safety Shoes + 3 Pairs of Socks
Comfort Bundle - Black Safety Shoes + 3 Pairs of Socks
Couldn't load pickup availability
- AUS Podiatrist Designed
- Free size exchange if unused
- Free delivery over $79
AUS & NZ Safety Standards Approved (Click To Expand)
AUS & NZ Safety Standards Approved (Click To Expand)
Heel Counter Material
Yes - 2.0mm A grade thermoplastic - Rigid
Steel free?
Yes
Safety toe material? Fibreglass composite + scuff protector
Upper material?
Synthetic Upper
Lining Material?
Moisture Wicking Mesh
Outsole / Midsole material? EVA Shock absorbing + anti slip
Torsional Stability (Shank)
Yes - Very rigid embedded shank
Penetration Resistance
Yes
Antistatic
Yes
Slip Resistant
Yes
Resistance to Hot Contact
Yes
Resistance to Fuel Oil
Yes
- Steel Toe Equivalent Composite Safety Toe Cap (Airport Friendly)
- Relieves Plantar Fasciitis
- 10+ hrs all day comfort / lightweight
- Stop Aching Feet, Knees & Back
- 6 mth outsole warranty
- Includes Orthotic Insoles ($49.95 value)
What is the difference?
Width Guide Info:
What's the Difference Between 2E and 4E Widths?
The difference between 2E and 4E comes down to the width of the boot.
A 4E fitting is approximately 3mm wider across the forefoot compared to a 2E. That small increase gives you a bit more room through the front of the boot.
Our boots are already designed to be wide and deep, so the 2E is considered a wide fit as standard.
How to Choose:
- If you've never had issues with boot width before, go with 2E
- If you've found boots too tight across the forefoot, go with 4E
- If you have a wider foot, choose 4E
- If your foot is regular width, choose 2E
Across all sizes, the key difference is simple:
4E gives you about 3mm more width through the forefoot.
Looking for orthotic safety boots instead?
-
Ergonx Safety Boots Lace Up (Helium) All Tan
Regular price $314.00 NZDRegular price -
Ergonx Safety Boots Lace Up (Helium) Black
Regular price $314.00 NZDRegular price -
Ergonx Orthotic Safety Shoe Lace Up (LITHIUM) Black
Regular price $289.00 NZDRegular price -
Ergonx All Tan Low Cut Safety Boots Lace Up (Helium)
Regular price $314.00 NZDRegular price
Podiatrist Review: It's what's on the inside that counts
Australian & NZ Safety Standard Approved Work Shoes
Ergonx Elements Safety Work Boots are tested to meet Australian & NZ Standards
Composite Toe Cap / Steel Cap Equivalent: We have replaced the traditional steel cap with a composite protective toe cap. The steel cap in most modern safety boots has been replaced with a composite cap. P = Penetration resistance: Penetration resistance plate included in the footwear. A = Antistatic: To prevent the build-up of electricity to cause a spark. E = Energy Absorption: Extra shock absorption under the heel. SRA = Slip Resistant: Slip Resistant ‘Ceramic tile with sodium lauryl sulfate’ HRO = Resistance to Hot Contact: The outsole does not melt, char, crack or craze when coming in contact with the 300℃ surface for one minute.
The Test Standards Safety Toe 200 Joules Impact Benefit:
The footwear protects the wearer’s toes against the risk of injury from falling objects when worn in industrial and commercial environments where potential hazards occur with the following protection plus, where applicable, additional protection. What: Australian & NZ Standards AS 2210.3:2019 Standard. To test the safety toe /safety shoe with a drop strike test machine at an impact energy of 200 Joule, the clearance under the toecap shall be by the standard of different sizes. Where: Toe
Safety Toe 15’000 Newton Compression Benefit:
The footwear protects the wearer’s toes against the risk of injury from crushing when worn in industrial and commercial environments where potential hazards occur with the following protection plus, where applicable, additional protection. What: Australian & NZ Standards AS 2210.3:2019 Standard. To test the safety toe with the plate of the compression machine until the load of 15000 Newton has been reached, the clearance under the toecap shall be by the standard of different sizes. Where: Toe
Safety Insert 1100 Newton Anti-Penetration Benefit:
The footwear prevents the wearer’s feet from puncturing or being injured by sharp objects or nails. What: Australian & NZ Standards AS 2210.3:2019 Standard. To test the whole sole assembly using a truncated nail of diameter 4,5 mm and a force of 1100 N. Where: Penetration resistance insert
A: Antistatic Footwear – Anti Static Electricity Benefit:
Static electricity finds ground through the boots. The purpose is to prevent the build-up o causing a spark. What: Australian & NZ Standards AS 2210.3:2019 Additional Classification. Antistatic Footwear. After conditioning in a dry and wet atmosphere, the electrical resistance is above 100kΩ and less than or equal to 1000kΩ.Where: Through the sole and insole of the boot. E: Energy AbsorptionBenefit: Superior shock absorption under the heel. See ‘Cushioning’ below for more details. What: Australian & NZ Standards AS 2210.3:2019 Additional Classification. Energy Absorption of Seat Region. Passes the test for shock absorption under the heel. Where: Under the heel
SRA: Slip Resistant with sodium lauryl sulphate on Ceramic Tiles Benefit:
Provides sufficient slip resistance to prevent a fall when working on soapy wet tiles. What: Australian & NZ Standards AS 2210.3:2019. SLS (soapy water) solution on ceramic tile test. The slip resistance coefficient o contact is ≥0.28, and the slip resistance coefficient with whole shoe flat contact is ≥ 0.32. Where: Outsole
Add extra comfort
-
Ergonx Work Socks (1 Pair)
Regular price $38.00 NZDRegular price$0.00 NZDSale price $38.00 NZD -
Ergonx Work Socks (6 Pack)
Regular price $170.00 NZDRegular price$226.00 NZDSale price $170.00 NZDSale -
Sold outErgonx Work Boot Laces – Tan
Regular price $13.00 NZDRegular price -
Ergonx Work Boot Laces – Black
Regular price $13.00 NZDRegular price
